Sunrise at Kinnoull Hill

Posted on by

Early one morning in August I set off up Kinnoull Hill in Perth; a 40-minute stroll through the woods and I arrived at the top just in time for sunrise.

There are a couple of classic viewpoints, although juggling foreground foliage is not the easiest. This is the view closer to the tower with a hint of sunlight behind the hill, a line of light streaking round to illuminate some of the yellow trees below:

Sunrise behind Kinnoull Hill, with the River Tay running along the Carse of Gowrie into the distance

And this is a little further back, the sun having risen illuminating the whole Carse of Gowrie and River Tay, sky still shades of yellow and pink:

A classic view of the tower and River Tay from Kinnoull Hill, Perth

Walking back through the woods was rather pleasant too – lots of dappled sunlight on the trees.

This was one of the first photo-sets I processed using Affinity Photo Pro on the iPad. Loving the colour and tone already!

Photo-Walk 2017

Posted on by

For several years, on and off, I’ve attended an annual Photo-Walk based in Inverary, Argyll. This year was no exception – always good to catch up with friends I’ve met on the walk previously.

As always, Argyll is a favoured place and Autumn a favoured season; the combination of light and landscape makes for enjoyable drives.

An auspicious viewpoint – right next to the public toilets on Inverary front – but it makes for a cracking view up the loch toward a spot of sunlight illuminating the hills around Ardkinglas.

This time the organizer, Richard, had brought a couple of props – most notably a bottle of Isle of Jura Superstition and I had one or two ideas in mind “just in case” we ended up at a particular favourite waterfall.

 

We made our way down the slippery embankment to the burn, where I set up tripod amongst the boulders to maximize the lead-in lines of water flowing around the rocks up to the waterfall – tripod placement was fairly tricky with a wide-angle (24mm) lens and the slippery lumpy terrain to negotiate – and then as the camera was busy taking 20s exposures (4x with pixel-shift) I trotted back and forth through the water firing a flash-gun down onto the bottle of whisky and surrounding rocks (manual triggering at 1/8 power with the diffuser out and reflector down to stop the light itself registering in the scene).

Product Placement
I quite like Isle of Jura whisky… not necessarily on the rocks though.

I had originally experimented focussing in on the bottle itself and using a wide aperture to restrict depth of field, but that did not fall naturally through the scene – the waterfall was still sharp behind – so I stopped-down to make everything in focus and relied on post-processing tricks in Affinity Photo to draw the eye onto the bottle differently instead – some Orton effect and various soft-light Gaussian blurs, masks and elliptical gradient fills to boost the saturation, make it all glow and still leave the bottle sharp and bright. The final toning came from Snapseed of all things.

I’ve done a little product-photography before but never tried blending [bad pun intended] it with landscape work, let alone pairing it with light-painting, but I think it worked – certainly compared to the straight shot, the bottle with its amber glow just makes it.

Morvern 5/4: The Road Back

Posted on by

And so we come to the last post in the series, a set of photos not entirely in Morvern but more on the way back up the shores of Loch Sunart and Loch Linnhe to the Corran Ferry, across and down to Loch Leven at Ballachulish.

There’s something wonderfully uplifting about rattling along these wee roads on beautiful sunny days, admiring the light.

Morvern 4/4: The Viewpoint

Posted on by

After the long drive, the walk in the woods, the angst of the cleared township, the second part of the walk resumes through the woodlands up hill to the viewpoint, looking out over Loch Doire nam Mart to the caves in craggy Beinn Uamh and beyond. On a sunny day with a few white clouds in a crystal-clear blue sky, it doesn’t get much nicer than this.

After a second walk through the woods around Aoineadh Mor, towards the top of the hill one comes across this beautiful view: conifer trees, Loch Doire nam Mart and more trees scattered on the slopes of craggy Beinn Uamh, all beneath a crystal clear blue sky.

Well, it does get a little better – Doglet had his dinner on the shores of the loch in amongst the rushes. Lucky chap.

Morvern 1/4: Approach

Posted on by

The West coast of Scotland – Lochaber, Argyll and further north – is well known for its amazing scenery. Earlier in the year I had a look around on Google Earth and thought the landscape looked pretty impressive opposite Mull around the Ardtornish area on the Morvern peninsula.

It certainly did not disappoint. Even having just driven 4 hours all around Fort William, across and round Loch Eil at great length (single-track road with passing places and a 60 limit), I had to stop to admire the crystal clear blue sky and lines of mountains receding into the distance:

There followed a short drive down to Loch Arienas, which was also just beautiful – blue water reflecting blue sky:

The Return of Serif

Posted on by

It feels funny to think that back in the early 1990s Serif was known for PagePlus, in the days when such things were known as desktop publishing or DTP applications.

Recently, however, they’ve produced Affinity Photo for Mac, Windows and iPad. After one or two folks recommended it, I thought it was time to add another trick to the photo-publishing workflow and have a play. After all, if nothing else, having an iPad would solve my doubts with colour-management issues on Linux, wouldn’t it?

So I’ve spent a few weeks driving around hunting scenery and taking photos of it and gradually evolving a few routines: photos are still shot on the Pentax K-1; processed (variously pixel-shift or HDR) using dcraw on Linux, where I also run them through darktable for a lot of toning work; the results are then copied to an ownCloud folder which synchronizes automagically with the iPad; a bit of juggling with share-to-Affinity and share-to-Photos and share-to-ownCloud later and the results are copied back to the workstation for final organization, checks and publication.

Within Affinity, my workflow is to import an image and ensure it’s converted to 16-bit P3 colour-space – this is a bit wider than sRGB and native to the iPad’s display. I then run the Develop module which tweaks exposure, brightness and contrast, clarity, detail, colour-balance (not so much), lens distortions, etc. After that, I use layers to remove sensor-dust and other undesirable feature. Top tip, use a new pixel layer for the in-painting tool set to “this layer and below”; then all the in-paintings can be toggled on and off to see the effect; also use a brightness+contrast adjustment layer above that while you work, so the corrections will be even less visible when the contrast is reduced back to normal. If the image requires it, I’ll add one or two fill layers for gradients – better to use an elliptical gradient that can be moved around the scene than a vignette that only applies in the corners. Finally, I merge all the layers to a visible sum-of-all-below pixel layer,on which I run the Tonemapping persona; ignoring all the standard presets (which are awful), I have a couple of my own that make black-and-white in low- and high-key targets, in which I can balance local versus global contrast. If I produce a black&white image, it probably arises from this layer directly; sometimes, dropping the post-tonemapped layer into the luminosity channel makes for a better colour image as well (subject to opacity tweaking).

So, some results. It produces colour:

It produces black and white:

One final thing: I used to hate the process of adding metadata – titles and descriptions, slogging through all my tags for the most pertinent ones, etc. Because the ownCloud layer is so slow and clunky, it makes more sense to be more selective, choose fewer photos to go through it; if I also add metadata at this stage, I can concentrate on processing each image with particular goals in mind, knowing that all future versions will be annotated correctly in advance. Freedom!

Just One Photo

Posted on by

Black Spout Waterfall, Pitlochry

Some days you only need to come away with one landscape image to justify an excursion.

On Saturday I set sail with Doglet and a friend and strolled through Black Spout Woods around Pitlochry, up to the viewpoint across the gorge where you can see the full height of the waterfall, and then round to the more accessible bit near the top of the falls, which still takes a fair amount of scrambling around on the river bank to get down to.

 

A nice stroll through the woods, a view across the gorge to the full height of the waterfall, some scrambling around on the banks to get down to this level (a small fraction of the total height down from the top) with friend and dog… A good way to spend an afternoon

Technicalities:

There are three conscious aspects to this shot:

Composition

I wanted to make the most of the 15-30mm lens, so with a bit of wiggling around at the scene I found a spot right in front of the cascades that would showcase the 16mm ultra-wide field of view with a strong foreground. Nothing clipped; there’s negligible cropping except for lens-correction. There’s something in each pair of corners: the strong diagonal line of the dead tree-trunk in the foreground is echoed by the three distant trees in the far top-left; the negative space of the burnt-out sky has an echo in the expanse of run-off water in the bottom; treated as three stripes, there’s a balance between the height of the frame given to the run-off, to the bright white cascades, and to the woods+sky at the top.

Sensor controls

I made 10 source images on the Pentax K-1, varying the exposure as follows:

f/13.0 1/50s; f/14.0 1/8s;
f/16.0 0.4s; f/16.0 0.5s
f/16.0 0.5s; f/16.0 0.8s
f/16.0 1/4s; f/16.0 1/8s
f/16.0 1/8s; f/18.0 1/6s

This set of exposures spans a large contrast range from bright grey sky down to dark shadows in the rocks; it varies the shutter speed so at least a few will make the water look like brushed cotton; it varies the aperture partly to cater for the range of shutter speeds, and partly so as much of the shot as possible has a frame with maximum detail before diffraction. Enough data that enfuse could find a good midtone maximizing local entropy (detail) at every pixel.

Each of the above had pixel-shift enabled for greater resolution, totalling 40 frames of 36MPel resolution. The shutter was open for a combined total of 12s.

Post-processing

I used my open-source Pentax K-1 pixel-shift workflow on each of the 10 images above, and then reused it again to blend all 10 together into a combined HDR average. Opening this in darktable, I proceeded to correct lens-distortion, finalize the crop (16:10 aspect-ratio, one of my favourites for landscape), set detail modules (no need for noise-reduction! some balancing of detail, local detail, equalizer modules though) and exposure, toning (including tonemapping and low-pass filter) and colour (Velvia). There are not many localized modifications, but there are significant grad-ND filters both down through the trees and, opposing that diagonally, up from the bottom of the frame, along with two instances of the vignetting filter (one significant, one just clipping the corners); there is also extra local contrasted masked into an area around the dead tree trunk. Finally I opened the image in The Gimp and ran the G’Mic filter suite including colour-grading twice (once conventionally, once with extra highlight/shadow duotone effects, blended together – this has the side-effect of changing the tonality in the green leaves to make it look brighter/sunnier than it actually was). A tweak to the curves to lift the overall gamma and then I overlaid my favourite texture image, a photo of a sheet of Hahnemuehle Photo-Rag paper, in soft-light mode to soften the contrast and add a small amount of texture into otherwise barren areas.

Why this Workflow?

Working this way hits a sweet-spot in terms of convenience and image-quality.

I did not fall in the river. That’s a good start.

With such a wide field of view, every centimeter counts when choosing the location. With the 15-30mm lens I was able to experiment, iteratively varying location and focal length, until an optimum position was found, all the while seeing exactly what the final composition would be in live-view.

Pixel-shift – moving the sensor around in a 1px square pattern – works as a great way to increase the resolution.
The alternative would be to shoot a panorama, but that would still require HDR blending of frames as well as risking motion-artifacts in the trees; with just HDR on its own, the ghosting of the leaves from averaging multiple frames is a more pleasant indication of movement rather than errors in stitching. Additionally, shooting a panorama would require just as much care over camera position but would not allow a preview of the composition.
As a hybrid option, with cameras that lack pixel-shift or equivalent technology, one could compose approximately and then vary the tripod position subtly to emulate hand-held camera-shake; this is almost identical to pixel-shift in terms of super-resolution, but varying the camera position risks introducing artifacts from lens-distortion and parallax between foreground and distant parts of the scene, that pixel-shift avoids.

Additionally, shooting every frame 4x over, automatically, increases the overall exposure time into multiple seconds, even in daylight, which avoids the need for Big Stopper-type filters (especially handy on a lens that would require a special holder for such).

The Dumpling

Posted on by

Just to the south of Loch Lomond beside the village of Gatocharn lies Duncryne Hill – a positively cute protrusion consisting of sandstone and conglomerate from the Emsian era early in the Devonian Period, affectionately known as The Dumpling.

Having discovered it on Google Earth, thinking it might afford good views over Loch Lomond and the Highlands to the north, I visited it this past weekend.

I wasn’t disappointed.

Approaching The Dumpling

Some artwork – looking at Loch Lomond from the top of Duncryne Hill:

The Highland Boundary Fault runs from Arran to the south-west, cutting through Loch Lomond between Arden (west) to Balmaha (east), forming a clear escarpment along the side of Conic Hill.

 

The Highland Boundary Fault runs right through the middle of this photo – through Loch Lomond around Balmaha, causing the rising mountains to the right of the scene.

The clouds were fairly zipping along, obscuring and bathing the landscape in crepuscular rays, so I had to make a short timelapse video of the vista:

With such light and rain-clouds passing by, on returning to the top of the hill I was greeted by a dramatic full-on rainbow with complete primary and secondary bows and supernumaries glowing in super-saturated vibrant arcs over the trig-point.

And just to finish the day’s expedition, there was some beautiful early golden-hour evening sunlight back-lighting a group of trees outside Drymen.

A Day In Clouds

Posted on by

That was 2017-06-20, that was. A beautiful blue sky with white fluffy wispy cirrus cloud catching the setting sun…

…followed by a noctilucent cloud display around 1am:

NLCs are the highest-flying clouds, occurring at altitudes up to 80km where the next highest type (cumulonimbus) only reaches 12km and most are lower still. Most typically they resemble a fine silver filigree of ice-cold pale blue, although more complex forms have been seen. First maybe-seen in 1885, they only really came to prominence since the 1980s, as a canary for changes in the upper atmosphere linked to climate change.

As I stood and watched the display, a patch of silver mist formed over Strathearn and made its way west along the A85 toward Crieff, so I made a little timelapse video – 17 minutes’ data compressed into 1:

Portknockie

Posted on by

Continuing the mega road-trip drive from a day in April: having taken in Dunnottar castle I proceeded up to Portknockie on the north Moray coast. A well-known location with lots of scope to explore, sitting on a transition between red sandstone conglomerate and quartzite underlying rock.

 

Bow-Fiddle rock itself is situated just beyond the mouth of a cove with interesting caves to the north side:

The approach to Bow-Fiddle rock at Portknockie.
We’re heading down to that strip of a pebble beach…

There’s a classic composition to be had by heading down to the boulders just beyond the pebble beach, plonking one’s tripod on the rock and adding enough ND filters to make a long exposure. With the right light and the wind kicking-up choppy waves, it can make for pleasantly dramatic arty photos. And despite being a sunny day, having to lie down on the hard rock to keep my shadow out of the shot, it definitely didn’t disappoint…

Technical details:

Pentax K-1; Samyang 24mm f/1.4 lens at f/11; Nisi ND1000 (equivalent to a Big Stopper) and circular polariser filters; ISO 100; 30s exposure using pixel-shift for a total of 2 minutes’ exposure at high resolution.

Birnam Hill: Hunting the Highland Boundary Fault

Posted on by

I’ve been to Birnam Hill and Duncan’s Hill area at least six times, so it made a good testing ground for the new Pentax K-1 camera.

It wasn’t the best of days for landscape photography – a bit early in the day for what little light there was to be really photogenic – but there was a moment when the sun broke through and illuminated some birch trees on top of Duncan’s Hill most beautifully:

For some years I’ve known the Highland Boundary Fault crosses the A9 around Dunkeld/Birnam area, but never really pinpointed the exact location.

On my first visit I walked around Duncan’s Hill through Birnam Wood and Rochanroy Wood: I observed a particular lump of rock exhibiting clear strata sticking out of the hillside:

As I passed the edge of the established woodland, there was a pronounced drop of about a metre to the level of the new conifer trees to the right. And I wondered if this was a particular noted geological formation.

Highland Boundary Fault, Birnam Hill

Three paths: this one leads down the line of the Highland Boundary Fault

On more recent visits I geotagged the location and compared with the British Geological Survey’s maps to see the rock types change either side of the dip – till, changing to slate and grit and then to psammite and semipelite typical of the Highlands.

On further investigation with Google Earth, the photo on the corner of the dip is right on the line of the Highland Boundary Fault itself, running up from Rohallion Loch through the lodge, round north-east turning easterly across the A9 south of Birnam.

My photo pinpointed right on top of the Highland Boundary Fault

The previous photo pinpointed right on top of the Highland Boundary Fault

Got it! Clear confirmation. Right on the money, first time 🙂

The path continues across a pronounced dip in the landscape before continuing up the other side to Stair Bridge Viewpoint and the King’s Seat on Birnam Hill.

Of course my favourite clear pure waterfall was still running:

The path affords some excellent views back of the Highland Boundary Fault cutting across the landscape:

Highland Boundary Fault to the east of Birnam

And finally, as far up the hills as I wanted to go that day, at Stair Bridge Viewpoint I was rewarded with a clear landscape vista over Rohallion Lodge to the Lowlands to the south:

View from Stair Bridge looking over Rohallion Lodge to the Lowlands to the south

Autumn Holiday 2016: Heading Home

Posted on by

Having spent a few days based in my favourite Glen Affric hunting scenery up in the far North, I drove back down Loch Ness. Thinking to take a detour along the A827 (toward Skye), I joined the A87 south only to be met with road-closed signs.

There was a bit of light in the layby while I made my mind up…

The view from the layby also included a classic interaction of mankind and nature – rarely, for me, this is highly manipulated (several partial wind-turbines removed and the remaining one moved across the frame and inverted) but illustrates the concept and contrast quite nicely:

“Speaking to the Sky”
Originally a photo of a few large wind turbines on the slopes of Meall Dubh; made into a bit of a statement.

Given that the first detour was closed, I went a little further along to Loch Cluanie on the road to Skye and had a quick play with the new Nisi filters[amazon], admiring the sunlight on the loch shore:

Perhaps not the best light for landscape work, being late morning / nearly noon, but quite nice and bright sunlight on Loch Cluanie nonetheless.

A rather late lunch was had at my favourite pub in Glencoe, the Clachaig Inn.

The weather turned foul as we travelled through Glencoe, but it made for an interesting timelapse video of the clouds and mist lapping around two of the Three Sisters mountains (Beinn Fhada and Gearr Aonach):

And this is what it looked like shooting it… complete with chamois leather cloth to keep the rain off the camera:

[sphere 3061]

At Tarbat Ness

Posted on by

Continuing the third day of my holiday last November, having been to the Reelig Glen in the morning, with the weather still mostly inclement, I went for a nice long drive up to Tarbat Ness by Portmahomack. The lighthouse – the third-tallest in Scotland – was engineered by Robert Stevenson in 1830, a stripy shapely construction standing on cliffs above the Devonian old red sandstone shore, making a great classic scene to photograph.

And this is the more immersive view of what it’s like to be there:

[sphere 3047]